Power Guarantee 12V DC High Power Series - For IR Cameras Camera Side – Passive Video Balun & Power Step Down 12V DC Receiver Model: VBP2412DCStandard Lead 11.4cm Lead VBP2412DC-50Extended Lead 50cm Lead 4-CH / 8-CH / 16-CH Passive Balun with Power Server for Power Side Model: VBP36DC-04HA 4-CH VBP36DC-08HA 8-CH VBP36DC-16HA 16-CH
VBP36DC-04HA, VBP36DC-08HA, and VBP36DC-16HA are passive video balun power hub devices capable of transmitting 4/8/16 channels of baseband video signal and providing 12V DC power for all 4/8/16 channels at the same time using UTP cable. These devices are designed to be used with VBP2412DC / VBP2412DC-50 passive video and power guarantee balun.
VBP2412DC/VBP2412DC-50 Features – Camera Side:
• Use an Unshielded Twisted Pair cable (UTP) to transmit video    signal and delivering power to camera at the same time • Passive video balun with step down power stabilizer to 12V DC • Low cost with no additional cabling for power, save time on    installation and trouble shooting • Transmission distance up to 1000ft / 300m • Support all baseband signal formats including PAL, NTSC and SECAM • Power input range from 15V to 40V DC • Maximum output power 12V DC with 500mA @ 180m / 600ft • Over current trouble indicator LED • RJ45 jack design for easy connection • RJ45 jack 568A & 568B miss wiring prevention design protect    device from damage • Built-in Static Electricity and Lightning Surge Protection
VBP36DC-04HA / VBP36DC-08HA / VBP36DC-16HA Features – Power Side:
• Using UTP cable to transmit video signal and provide power to camera simultaneously • Low cost on cabling, save time on installation and trouble shooting • Transmission distance up to 300m / 1000ft • Support all baseband signal formats including PAL, NTSC & SECAM • Universal power input support 110V~250V • Regulated 36V DC output power • Using 3 pairs of UTP cabling to carry more current • Consistent with EIA/TIA568B & EIA/TIA568A standard cable connections • These devices have Over Current Recover IC instead of Recover Fuse for true isolation of each channel • RJ45 jack design for easy connection • Connector reverse polarity and short circuits protection design • Built-in Lightning surge protection and Interference Rejection • Low noise exhaust fan ensure system stability • Provide internal installation spare modules • Main power switch with indicator light & trouble indicator LED • DC Power: 12V~48V DC • Rackmount Ear included
Application Diagram:
Although the power guarantee device transmits 36V DC, the Passive Balun with Power Stabilizer steps down the voltage at 12V DC when supplying power to the camera.
Specifications for Camera Side
Model Number A-13-12V and A-13-12V-50 VBP2412DC VBP2412DC-50 Power Output Voltage 12V DC + 5% Output Current 12V DC 500 mA @ 0~200m / 0~600ft 12V DC 300 mA @ 200~ 300m / 600~1000ft Distance 0~300m / 0~1000ft Supported Power Consumption 6W Max. Video Transmitting Properties Supporting Video Signals All Baseband Signals including PAL, NTSC, SECAM Balance Band 0~6MHz(-3dB) Maximum Transmission Distance Color 300m / 1000ft Transmitting Cable UTP CAT5e Interference Rejection >60dB Transmission Channel 1 Connection Properties Video Connector 1 Male BNC with Cable, Resistance 75 Ohms UTP Video and Power Transmission 1 RJ45 Jack with Indicator light Power Connector 12V DC Jack Surge Protections Lightning Protection 2KV IEC6100-4-5 1955 (GB/T 17626.5) Static Electricity Protection 1a Contact Discharge Level 3 1b Air Discharge Level 3 IEC6100-4-2 Indicators Power LED Green Over Current Protection LED Yellow Stability MTBF >10,000 hours Physical Properties Dimensions (L x W x H) 220mm x 36mm x 22mm / 8.66” x 1.41” x 0.86” (with Cable) Power & BNC Lead Length 11.4cm / 4.5” 50cm / 20” Weight 0.11 lbs / 50g Environment Operating Temperature 0°C ~ 50°C / 32°F ~ 131°F Relative Humidity 0~95% (none Condensation) Storage Temperature -20°C~80°C / -4F ~ 176°F
Specifications for Power Side
Model Number A-14H-04CH / A-15H-08CH / A-16H-16CH VBP36DC-04HA VBP36DC-08HA VBP36DC-16HA Power Input Voltage 110V~250V AC (50Hz/60Hz) Supported Power Consumption 100W Max. 150W Max. 320W Max. Current Conversion Efficiency >75% Output Voltage 36V DC, 2.8A 36V DC, 4.2A 36V DC, 8.8A Output Current 300m / 1000ft @ 1096mA Number of supplied Channel 4 8 16 Video Properties Supporting Video Signals All Baseband Signals including PAL, NTSC, SECAM Balance Band 0~6MHz(-3dB) Maximum Transmission Distance Color 300m / 1000ft Transmitting Cable UTP CAT5e Interference Rejection >60dB Number of Receiving Channel 4 8 16 Connection Properties Video Connector 4 Female BNC Resistance 75 Ohms 8 Female BNC Resistance 75 Ohms 16 Female BNC Resistance 75 Ohms Power Connector 1 x AC input plug (black) UTP Video and Power Transmission 4 RJ45 Jack with Indicator light (white) 8 RJ45 Jack with Indicator light (white) 16 RJ45 Jack with Indicator light (white) Surge Protections Lightning Protection 2KV IEC6100-4-5 1955 (GB/T 17626.5) Static Electricity Protection 1a Contact Discharge Level 3 ; 1b Air Discharge Level 3 IEC6100-4-2 1955 (GB/T 17626.5) Main Fuse 250V, 4 A Indicators Power LED Green Over Current Protection LED Yellow Main Switch On/Off LED Red Stability MTBF >10,000 hours Physical Properties Dimensions (L x W x H) 280mm x 180mm x 66.8mm 11.02" x 7.09" x 2.63" 280mm x 180mm x 66.8mm 11.02" x 7.09" x 2.63" 430mm x 200mm x 66.8mm 16.93 " x 7.87 " x 2.63 " Weight 3.8 lbs / 1723 g 4.4 lbs / 1995 g 6.4 lbs / 2902 g Environment Operating Temperature 0°C ~ 55°C / 32°F ~ 131°F Relative Humidity 0~95% (none Condensation) Storage Temperature -20°C~80°C / -4°F ~ 176°F Accessories AC Power Cable 1 Rack-Mount Bracket 2 Spare Fuse 1
NOTE: The current supplied to the camera depends on the lengths & quality of the cable.
*Specifications are subject to change without notice.
Rackmount Included for Passive Balun & Power Servers:
4-CH	8-CH	16-CH

RoHS	A-13-12V_A-13-12V-50_A-14H-4CH_A-15H-8CH_A-16H-16CH

UTP Balun Cabling Systems and Solutions provides an answer for all your cabling needs. Our complete line of baluns allows you to easily extend your current audio/video/data system up to 1200ft and even up to 8000ft, with an active balun.

UTP Baluns are perfectly suited for applications such as these:
CCTV Security Systems – Video Balun, CCTV Balun
CCTV Surveillance Systems – Video Balun, CCTV Balun
CCTV Camera – Video Balun, CCTV Balun
Home Theatre – DVI & HDMI Balun
LCD/CRT Monitors – VGA PC Balun, VGA Extender, and VGA Distributor
Televisions – DVI & HDMI
VGA Monitors – CCTV Balun, VGA Balun, VGA PC Balun, VGA Extender, and VGA Distributor
DVD Players – DVI & HDMI Balun
PCs (Personal Computers) – VGA Monitor, Keyboard, & Mouse Long Range CAT5E Extender
Laptops/Notebooks – VGA Monitor, Keyboard, & Mouse Long Range CAT5E Extender
USB and PS/2 Devices – VGA Monitor, Keyboard, & Mouse Long Range CAT5E Extender
UTP (Unshielded Twisted Pair Cable) – Cat5E, Cat6 for Extender Balun
BNC (Coaxial Cable) – Video Signal Filter.

How does a balun work?
Baluns are used to convert between “Balanced and Unbalanced” electrical signals.
Baluns work by transforming the original unbalanced (video/power/data/etc.) signal to a balanced frequency used by a different cable, like CAT5 UTP. Not only does this reduce interference, but it also allows you to transmit a signal much longer than the original application would allow. Baluns are always utilized in pairs. One balun is needed to convert the original signal to a new frequency, and another balun is used at the other end to revert to the original frequency.

“Passive” Video Baluns do not require power, and can extend a signal up to 2000ft (B/W).
“Active” Video Baluns require power, but can extend a signal up to 8000ft (B/W).