Audio Balun / RCA / Pigtail Kit
Model: VPAB100LP       Only sold as a set

VPAB100LP Audio Balun / RCA / Pigtail Kit is a set of passive (non-amplified) device with 4½” lead that allows the transmission of real-time audio over Unshielded Twisted Pair (UTP) cable. Blue color label indicates transmitter (Tx). Red color label indicates receiver (Rx). 1V audio signal can be transmitted up to 1000ft / 300m and 6V audio signal can be transmitted up to 3300ft / 1000m. Sold as a set only.

 

 
   
   
 
 
Quick Connect
  Tx - BlueRx - Red
Features:
  • Use an Unshielded Twisted Pair cable (UTP), like CAT5, to transmit audio signal up to 1000ft / 300m
  • Real-time transmission of audio signal without any delay
  • Passive, no power required
  • Surge / Lightning Protection
    10/700 μs Pulses: 2KV
    Standard: IEC6-4-2/1955
  • ESD : Electrostatic Discharge Protection
     Contact Discharge: 6KV / Air Discharge: 8KV
    Standard: IEC61000-4-2
  • Wave / Interference Rejection & Isolation
    Extra Interference Rejection >60db
 
Application Diagram:
 


Specification:
Model Number
VPAB100LP
Audio Input / Output
RCA Male to Push Pin Terminal
Audio Property Resistance RCA
600 Ohms
UTP, RJ45 Date Connector
100 Ohms
Signal Transmission Bandwidth
20Hz~20KHz
Surge Protections Output Protection
2KV (common mode), 10/700 μs
IEC6-4-2/1955
Input Protection
2KV (different mode), 2KV (common mode)
IEC6-4-2/1955
Input Protection for Over Current
100mA
Electrostatic Discharge Protection (ESD)
Contact Discharge: 6KV / Air Discharge: 8KV
Standard: IEC61000-4-2
Wave / Interference Rejection & Isolation
Extra Interference Rejection >60db
Transmission Distance
1000ft / 300m
Stability MTBF
>10,000h
Cable
UTP / Twisted Pair CAT5 (AWG24)
Dimensions W x H x D
250 x 28 x 21mm (0.98” x 0.86” x 1.77”)
with 4 ½” Lead
Environment Operation Temperature
32°F ~ 131°F / 0°C ~ 55°C
Storage Temperature
-4°F ~ 176°F / -20°C ~ 80°C
Relative Humidity
0 - 95% (non-condensing)

RoHS
D-50

UTP Balun Cabling Systems and Solutions provides an answer for all your cabling needs. Our complete line of baluns allows you to easily extend your current audio/video/data system up to 1200ft and even up to 8000ft, with an active balun.

UTP Baluns are perfectly suited for applications such as these:
CCTV Security Systems – Video Balun, CCTV Balun
CCTV Surveillance Systems – Video Balun, CCTV Balun
CCTV Camera – Video Balun, CCTV Balun
Home Theatre – DVI & HDMI Balun
LCD/CRT Monitors – VGA PC Balun, VGA Extender, and VGA Distributor
Televisions – DVI & HDMI
VGA Monitors – CCTV Balun, VGA Balun, VGA PC Balun, VGA Extender, and VGA Distributor
DVD Players – DVI & HDMI Balun
PCs (Personal Computers) – VGA Monitor, Keyboard, & Mouse Long Range CAT5E Extender
Laptops/Notebooks – VGA Monitor, Keyboard, & Mouse Long Range CAT5E Extender
USB and PS/2 Devices – VGA Monitor, Keyboard, & Mouse Long Range CAT5E Extender
UTP (Unshielded Twisted Pair Cable) – Cat5E, Cat6 for Extender Balun
BNC (Coaxial Cable) – Video Signal Filter.

How does a balun work?
Baluns are used to convert between “Balanced and Unbalanced” electrical signals.
Baluns work by transforming the original unbalanced (video/power/data/etc.) signal to a balanced frequency used by a different cable, like CAT5 UTP. Not only does this reduce interference, but it also allows you to transmit a signal much longer than the original application would allow. Baluns are always utilized in pairs. One balun is needed to convert the original signal to a new frequency, and another balun is used at the other end to revert to the original frequency.

“Passive” Video Baluns do not require power, and can extend a signal up to 2000ft (B/W).
“Active” Video Baluns require power, but can extend a signal up to 8000ft (B/W).