![]() |
Long Range VGA & Speaker 1 in 4 out Transmitter |
|||||||||||||||
The VGAE4T is an active VGA video and audio transmitter similar to VGAE1T except it allows four channels of VGA video and audio signal transmission to four different remote destinations via Unshielded Twisted Pair (UTP) cable. VGAE4T provides four channels of video and audio via RJ45 outputs and one set of local VGA video and audio outputs. When working with VGAE1R, VGAE4T can extend VGA video and audio transmissions up to 1000ft / 300m with a standard resolution of 1024x768 and up to 1600x1200 @ 60Hz for 500ft / 150m. |
||||||||||||||||
| Features: | ||||||||||||||||
|
||||||||||||||||
| Application Diagram: Maximum Configuration up to 8 Monitors & Speakers | ||||||||||||||||
|
||||||||||||||||
| Panel View: | |
![]() |
Front View |
| Rear View | |
| Model | VGAE4T |
|
| Power Properties | Voltage | 12V DC |
| Power Consumption | 1.5W |
|
| Connectors | DC Jack, USB-B |
|
| USB Protecting Current | 500mA |
|
| Video Properties | Video Input Connectors | 15-pin HDB Male (Black) Resistance: 75 Ohms |
| Video Output Connectors | 15-pin HDB Female (Black) Resistance: 75 Ohms |
|
| Signal Transmission Output Connector | 4x RJ45 Resistance: 50 Ohms |
|
| Signal Transmission Band | > 350 MHz (-3dB) |
|
| Linear Distortion | < 3% |
|
| Synchronous Signal | 0V ~ 5V, TTL PWL |
|
| Synchronous Signal Band | 1K ~ 200KHz |
|
| DDC2 | Support DDC2 |
|
| Audio Properties | Connectors | 2 x 3.5mm Audio Jack |
| Input Resistance | 10K Ohms |
|
| Output Resistance | 600 Ohms |
|
| Band | 10 ~ 20KHz |
|
| Indicators | Video LED | Green |
| Audio LED | Yellow |
|
| Power LED | Red |
|
| Stability | MTBF | > 20,000h |
| Physical Properties | Dimensions (LxWxH) | 195mm x 85mm x 32mm |
| Housing Material & Color | Metal, Black |
|
| Weight | Net Weight | 510g |
| Environment | Operating Temperature | 0°C ~ 70°C |
| Relative Humidity (non-condensing) | 10 ~ 85% |
|
| Storage Temperature | -10°C ~ 80°C |
|
| Accessories | Power Adaptor | Outputs 12V DC, 1Amp Inputs 90V ~ 250V AC |
| VGA & AUDIO & USB Cables | USB-A to USB-B Connector, Support USB 2.0; 1.5m Length VGA Cable, and Audio Cable |
|
| Others | 2 x Mounting Bracket, 4 x screws |
|
| Packing | Box Size (LxWxH) | 280mm x 192mm x 75mm |
![]() RoHS |
B-25 |
UTP Balun Cabling Systems and Solutions provides an answer for all your cabling needs. Our complete line of baluns allows you to easily extend your current audio/video/data system up to 1200ft and even up to 8000ft, with an active balun.
UTP Baluns are perfectly suited for applications such as these:
CCTV Security Systems – Video Balun, CCTV Balun
CCTV Surveillance Systems – Video Balun, CCTV Balun
CCTV Camera – Video Balun, CCTV Balun
Home Theatre – DVI & HDMI Balun
LCD/CRT Monitors – VGA PC Balun, VGA Extender, and VGA Distributor
Televisions – DVI & HDMI
VGA Monitors – CCTV Balun, VGA Balun, VGA PC Balun, VGA Extender, and VGA Distributor
DVD Players – DVI & HDMI Balun
PCs (Personal Computers) – VGA Monitor, Keyboard, & Mouse Long Range CAT5E Extender
Laptops/Notebooks – VGA Monitor, Keyboard, & Mouse Long Range CAT5E Extender
USB and PS/2 Devices – VGA Monitor, Keyboard, & Mouse Long Range CAT5E Extender
UTP (Unshielded Twisted Pair Cable) – Cat5E, Cat6 for Extender Balun
BNC (Coaxial Cable) – Video Signal Filter.
How does a balun work?
Baluns are used to convert between “Balanced and Unbalanced” electrical signals.
Baluns work by transforming the original unbalanced (video/power/data/etc.) signal to a balanced frequency used by a different cable, like CAT5 UTP. Not only does this reduce interference, but it also allows you to transmit a signal much longer than the original application would allow. Baluns are always utilized in pairs. One balun is needed to convert the original signal to a new frequency, and another balun is used at the other end to revert to the original frequency.
“Passive” Video Baluns do not require power, and can extend a signal up to 2000ft (B/W).
“Active” Video Baluns require power, but can extend a signal up to 8000ft (B/W).